DGSHAPE DWX 53 DC 5 Axis Dry Dental Milling Machine
Manufactured & Supplied By:
Agkem Impex Pvt. Ltd.
Verified Supplier
| Origin Country | India 🇮🇳 |
|---|---|
| Inquiry Response | Within 24 Hours |
Product Description
DWX-53DC
Cuttable material
Zirconia, Wax, PMMA, Composite resin, PEEK, PEKK Gypsum, Glass Fiber reinforced resin, CoCr sinter metal, polycarbonate
Loadable workpiece shape
Step section:
98.5 mm (diameter), height 10+_0.3 mm
Body section:
95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm
Pin diameter:
6 mm
Loadable workpiece weight
850 g or less
Number of adapters housed
6
Operating Speed
XY
~3000 mm/min
z
~2700 mm/min
Spindle motor
Brushless DC Motor
Spindle rotating speed
6,000 to 30,000 rpm
Rotary axis travel angle
A:
±360°
B:
±35°
Number of burs housed
15
Attachable bur
Shank diameter:
4 mm
Length:
40 to 55 mm
Compatible compressed air
0.2 MPa
Interface
USB
Control command set
RML-1, NC code
Power requirements
AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1)
Power consumption
Approx. 200 W
Operating noise
During operation:
70 dB (A) or less (when not cutting),
During standby:
45 dB (A) or less
External dimensions
Width x Depth x Height:
25.6 x 30.1 x 33.0 in. (598 x 763 x 831 mm)
Weight:
120 kg (265 lbs.)
Installation environment
Indoor use, Altitude: Up to 2,000m (6,562 ft.), Temperature: 5 to 40 ℃ (41 to 104°F), Humidity: 35 to 80 % RH (no condensation), Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporaty overvoltage: 1440 V, Long-term temporaty overvoltage: 490 V
Included items
Power cord, Safety information, USB cable, quick access guide, Detection Pin, automatic correction jig, torque screwdriver, T-shaped hexagonal Screwdriver, L-shaped hexagonal wrench, open edge adapter, adapter rack, pin type workpiece adapter, milling bur, tablet holder, milling bur holder, regulator, barcode level
System requirements for USB connection
Operating system (OS)*
Windows® 7/8/8.1/10 (32 or 64 bit)
Optical drive
CD-ROM drive
USB cable
Use the included USB cable
Cuttable material
Zirconia, Wax, PMMA, Composite resin, PEEK, PEKK Gypsum, Glass Fiber reinforced resin, CoCr sinter metal, polycarbonate
Loadable workpiece shape
Step section:
98.5 mm (diameter), height 10+_0.3 mm
Body section:
95 mm (diameter), height max. 35 mm
Pin diameter: 6 mm
Pin diameter:
6 mm
Loadable workpiece weight
850 g or less
Number of adapters housed
6
Operating Speed
XY
~3000 mm/min
z
~2700 mm/min
Spindle motor
Brushless DC Motor
Spindle rotating speed
6,000 to 30,000 rpm
Rotary axis travel angle
A:
±360°
B:
±35°
Number of burs housed
15
Attachable bur
Shank diameter:
4 mm
Length:
40 to 55 mm
Compatible compressed air
0.2 MPa
Interface
USB
Control command set
RML-1, NC code
Power requirements
AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A
(overvoltage category II, IEC60664-1)
Power consumption
Approx. 200 W
Operating noise
During operation:
70 dB (A) or less (when not cutting),
During standby:
45 dB (A) or less
External dimensions
Width x Depth x Height:
25.6 x 30.1 x 33.0 in. (598 x 763 x 831 mm)
Weight:
120 kg (265 lbs.)
Installation environment
Indoor use, Altitude: Up to 2,000m (6,562 ft.), Temperature: 5 to 40 ℃ (41 to 104°F), Humidity: 35 to 80 % RH (no condensation), Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporaty overvoltage: 1440 V, Long-term temporaty overvoltage: 490 V
Included items
Power cord, Safety information, USB cable, quick access guide, Detection Pin, automatic correction jig, torque screwdriver, T-shaped hexagonal Screwdriver, L-shaped hexagonal wrench, open edge adapter, adapter rack, pin type workpiece adapter, milling bur, tablet holder, milling bur holder, regulator, barcode level
System requirements for USB connection
Operating system (OS)*
Windows® 7/8/8.1/10 (32 or 64 bit)
Optical drive
CD-ROM drive
USB cable
Use the included USB cable
Similar Products
Other products in this category or from this manufacturer.